Photoluminescence Quantum Yield Research Articles

Fluorescence‐Enabled Colored Bilayer Subambient Radiative Cooling Coatings

AbstractPassive daytime radiative cooling has emerged as a promising green technology for the thermal management of buildings, vehicles, textiles, and electronics. Typically, both high solar reflectance and high thermal emissivity are prerequisites to achieve sufficient daytime cooling. However, colored radiative cooling materials are facing the dilemma of introducing visible light absorption, leading to challenges in balancing cooling and aesthetic demands. Here, three colored bilayer radiative cooling coatings, each comprised of a white base layer and a colored top layer with fluorescence enhancement are fabricated. Three phosphors (Sr2Si5N8:Eu2+, Y3Al5O12:Ce3+, and (Ba,Sr)SiO4:Eu2+) are employed with respective photoluminescence quantum yields (PLQYs) of 81%, 95.8%, and 91.0% as the colored pigment in the top layer. To mitigate the contradiction between coloration and solar reflectance, SiO2 microspheres are introduced into the top layer and utilize their Mie‐resonance‐based multiple scattering to increase the photoluminescent (PL) properties of the phosphors, which jointly boosts the effective solar reflectance (ESR) of the top layer. As a result, the three bilayer coatings exhibit soft colors while achieving subambient cooling with temperature drops of up to 1.5 °C. This fluorescence‐enhancement strategy may pave the way for preparing highly efficient radiative cooling coatings with tunable colors.

Efficient Green Spin Light-Emitting Diodes Enabled by Ultrafast Energy- and Spin-Funneling in Chiral Perovskites.

Introducing molecular chirality into perovskite crystal structures has enabled the control of carrier spin states, giving rise to circularly polarized luminescence (CPL) in thin films and circularly polarized electroluminescence (CPEL) in LEDs. Spin-LEDs can be fabricated either through a spin-filtering layer enabled by chiral-induced spin selectivity or a chiral emissive layer. The former requires a high degree of spin polarization and a compatible spinterface for efficient spin injection, which might not be easily integrated into LEDs. Alternatively, a chiral emissive layer can also generate circularly polarized electroluminescence, but the efficiency remains low and the fundamental mechanism is elusive. In this work, we report an efficient green LED based on quasi-two-dimensional (quasi-2D) chiral perovskites as the emitting layer (EML), where CPEL is directly produced without separate carrier spin injection. The optimized chiral perovskite thin films exhibited strong CPL at 535 nm with a photoluminescence quantum yield (PLQY) of 91% and a photoluminescence dissymmetry factor (glum) of 8.6 × 10-2. Efficient green spin-LEDs were successfully demonstrated, with a large EL dissymmetry factor (gEL) of 7.8 × 10-2 and a maximum external quantum efficiency (EQE) of 13.5% at room temperature. Ultrafast transient absorption (TA) spectroscopic study shows that the CPEL is generated from a rapid energy transfer accompanied by spin transfer from 2D to 3D perovskites. Our study not only demonstrates a reliable approach to achieve high performance spin-LEDs but also reveals the fundamental mechanism of CPEL with an emissive layer of chiral perovskites.

Ultrasensitive Piezochromic Molecular Crystals: Mechanical Pressure‐Induced Controlled Regulation of TADF and RTP

AbstractConsidering that regulation of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is necessary for a fluorophore to survive and properly show its characteristic features, it is successfully shown herein that a carefully designed novel pyrene derivative can exhibit remarkable aggregation‐induced emission (AIE) overcoming the characteristic fast excitonic decay of pyrene compounds. Moreover, it is established that J‐aggregation in the red‐emitting molecular crystals of the compound reduces the singlet‐triplet energy gap (∆EST), allowing TADF with a very high photoluminescence quantum yield (PLQY) of 72%. Whereas, anisotropic grinding of the same crystals generates well‐defined microcrystals that show RTP as the nature of aggregation changes. Impressively, under isotropic hydrostatic pressure, the crystals show near‐infra‐red (NIR) emission with a very high piezochromic luminescence sensitivity of 46.2 nm GPa−1. The results have established that formation of stable H‐aggregates in the microcrystals is responsible for the ultra‐long RTP. A highly sophisticated full‐spectrum Mueller‐matrix analysis is used for the first time in such systems to demonstrate the details of the effect of perturbation (pressure) on molecular conformation.

Targeted synthesis of a 3D covalent organic framework with fjh topology exhibiting high photoluminescence: A robust platform for sensitive detection of furantoin

The inappropriate use of antibiotics poses significant risks to both the environment and human health, necessitating the development of accurate and sensitive detection methods. Fluorescence detection, particularly utilizing three-dimensional (3D) covalent organic frameworks (COFs), stands out as a promising avenue. Unlike two-dimensional COFs, 3D COFs can mitigate fluorescence quenching resulting from non-radiative energy loss, primarily attributed to π-π interlayer stacking. In this study, by carefully selecting and designing the building blocks, we synthesized a 3D COF named PyTTA-TTFB-COF with fjh topology and remarkable photoluminescence. This was achieved through the combination of a 4-connected square chromophore, 1,3,6,8-Tetrakis(4-aminophenyl) pyrene, with a 3-connected triangle, 1,3,5-trimethyl-2,4,6-tris(4-formylphenyl) benzene, possessing a specific stereo conformation. Significantly, PyTTA-TTFB-COF exhibits a high photoluminescence quantum yield, notably reaching 60.1% in acetonitrile. Moreover, it displays substantial fluorescence quenching when exposed to furantoin, surpassing the performance observed with other antibiotics. Competitive experiments have confirmed that PyTTA-TTFB-COF can serve as a specific fluorescent probe for the interference-free detection of furantoin.

Green‐Emissive Carbon Dots with a High Quantum Yield Applied for Photoconversion Film to Prevent from Blue Light Damage

AbstractHigh‐energy blue light is highly detrimental to health as it can penetrate the lens into the retina, potentially causing atrophy or even death of retinal pigment epithelial cells. To prevent the harmful effects of high‐energy blue light on our health, here the preparation of a photoconversion film specifically designed to block high‐energy blue light is reported, which is composed of green‐emissive carbon dots (G‐CDs) with a high photoluminescence quantum yield (PLQY = 95%) dispersed in polyvinyl alcohol (PVA) matrix. Notably, such a film (named as G‐CDs@PVA) not only converts an incident laser light with a short wavelength into a fluorescence with a longer wavelength, but also exhibits concentration‐dependent (0, 10, 20, and 30 wt.%) blue light barrier rate and green‐emissive intensity. With the increase of the concentration of G‐CDs in the film, the blue light barrier rate of the film as well as the maximum intensity of the green emission are also increased. When the concentration of G‐CDs reaches 30 wt.%, the blue light barrier rate of G‐CDs@PVA achieves up to 97%. Furthermore, G‐CDs@PVA film is attached to a blue light‐emitting diode (LED) chip to explore its practical application in the field of blocking blue light damage.

Boosting External Quantum Efficiency to 12.0% of an Ultraviolet OLED by Engineering the Horizontal Dipole Orientation of a Hot Exciton Emitter

Currently, much research effort has been devoted to improving the exciton utilization efficiency and narrowing the emission spectra of ultraviolet (UV) fluorophores for organic light‐emitting diode (OLED) applications, while almost no attention has been paid to optimizing their light out‐coupling efficiency. Here, we developed a linear donor‐acceptor‐donor (D‐A‐D) triad, namely CDFDB, which possesses high‐lying reverse intersystem crossing (hRISC) property. Thanks to its integrated narrowband UV photoluminescence (PL) (λPL: 397 nm; FWHM: 48 nm), moderate PL quantum yield (φPL: 72%, Tol), good triplet hot exciton (HE) conversion capability, and large horizontal dipole ratio (Θ//: 92%), the OLEDs based on CDFDB not only can emit UV electroluminescence with relatively good color purity (λEL: 398 nm; CIEx,y: 0.161, 0.040), but also show a record maximum external quantum efficiency (EQEmax) of 12.0%. This study highlights the important role of horizontal dipole orientation engineering in the molecular design of HE UV‐OLED fluorophores.

Boosting External Quantum Efficiency to 12.0% of an Ultraviolet OLED by Engineering the Horizontal Dipole Orientation of a Hot Exciton Emitter.

Currently, much research effort has been devoted to improving the exciton utilization efficiency and narrowing the emission spectra of ultraviolet (UV) fluorophores for organic light-emitting diode (OLED) applications, while almost no attention has been paid to optimizing their light out-coupling efficiency. Here, we developed a linear donor-acceptor-donor (D-A-D) triad, namely CDFDB, which possesses high-lying reverse intersystem crossing (hRISC) property. Thanks to its integrated narrowband UV photoluminescence (PL) (λPL: 397 nm; FWHM: 48 nm), moderate PL quantum yield (φPL: 72%, Tol), good triplet hot exciton (HE) conversion capability, and large horizontal dipole ratio (Θ//: 92%), the OLEDs based on CDFDB not only can emit UV electroluminescence with relatively good color purity (λEL: 398 nm; CIEx,y: 0.161, 0.040), but also show a record maximum external quantum efficiency (EQEmax) of 12.0%. This study highlights the important role of horizontal dipole orientation engineering in the molecular design of HE UV-OLED fluorophores.

Modulating the Locally Excited States with a Regulating Substituent for Highly Efficient Red/Near‐Infrared Thermally Activated Delayed Fluorescence Emitters

AbstractDeveloping highly efficient red/near‐infrared (NIR) thermally activated delayed fluorescence (TADF) materials is important for organic light‐emitting diodes (OLEDs). Here, two TADF emitters, APTT and APTI, which have the same D/A backbone but different attaching groups at acenaphtho‐[1,2‐b]pyrazine‐8,9‐dicarbonitrile (APDC) core, are reported. The appended regulating groups can not only suppress the D/A rotation due to the space confinement effects but also modulate the locally excited triplet state (3LE). The improved molecular rigidity suppresses the non‐radiative process, accounting for the improved photoluminescence quantum yields (PLQYs), while the modulated 3LE promotes the reverse intersystem crossing (RISC) process due to the high utilization efficiency of triplets. Consequently, both APTT and APTI demonstrate high PLQY and fast RISC process, thereby enhancing TADF efficiency. The doped devices based on APTT and APTI achieve maximum external quantum efficiency (EQEmax) values of 20.5% and 25.4% with emission peaks at 664 and 670 nm, respectively. The non‐doped devices of APTT and APTI achieve the EQEmax of 2.8% and 2.9% with emission peaks at 788 and 794 nm, respectively. Encouragingly, the non‐doped devices of APTI have set new records for near‐infrared TADF OLEDs based on the APDC core. This study provides an efficient approach to modulating the optoelectronic properties of highly efficient NIR TADF OLEDs.

Pressure-Induced Distinct Self-Trapped Exciton Emission in Sb3+-Doped Cs2NaInCl6 Double Perovskite

Abstract The Cs2NaInCl6 double perovskite is one of the most promising lead-free perovskites due to its exceptional stability and straightforward synthesis. However, it faces challenges related to inefficient photoluminescence. Doping and high-pressure are employed to tailor the optical properties of Cs2NaInCl6. Herein, Sb3+ doped Cs2NaInCl6 (Sb3+:Cs2NaInCl6) was synthesized and exhibits blue emission with a photoluminescence quantum yield of up to 37.3%. Further, by employing pressure tuning, a blue stable emission under a very wide range from 2.7 GPa to 9.8 GPa, for the first time, realized in Sb3+:Cs2NaInCl6. Subsequently, the emission intensity of Sb3+:Cs2NaInCl6 experiences a significant increase (3.3-times) at 19.0 GPa. We reveal that the pressure-induce the distinct emissions can be attributed to the carrier self-trapping and detrapping between Cs2NaInCl6 and Sb3+. Notably, the lattice compression in the cubic phase inevitably modify the band gap of Sb3+:Cs2NaInCl6. Our findings provide valuable insights into the effects of the high pressure in further boosting unique emission characteristics but also offer promising opportunities for the development of doped double perovskites with enhanced optical functionalities.

Metal Fluorides Passivate II-VI and III-V Quantum Dots.

Quantum dots (QDs) with metal fluoride surface ligands were prepared via reaction with anhydrous oleylammonium fluoride. Carboxylate terminated II-VI QDs underwent carboxylate for fluoride exchange, while InP QDs underwent photochemical acidolysis yielding oleylamine, PH3, and InF3. The final photoluminescence quantum yield (PLQY) reached 83% for InP and near unity for core-shell QDs. Core-only CdS QDs showed dramatic improvements in PLQY, but only after exposure to air. Following etching, the InP QDs were bound by oleylamine ligands that were characterized by the frequency and breadth of the corresponding ν(N-H) bands in the infrared absorption spectrum. The fluoride content (1.6-9.2 nm-2) was measured by titration with chlorotrimethylsilane and compared with the oleylamine content (2.3-5.1 nm-2) supporting the formation of densely covered surfaces. The influence of metal fluoride adsorption on the air stability of QDs is discussed.

Synthesis, characterization, and optical studies of lead-free perovskite, Cs3M2Br9 (M = Bi, Sb) nanocrystals

In recent years, there has been a surge in research interest surrounding all inorganic lead perovskite nanocrystals (NCs) owing to their exceptional performance in various optoelectronic devices. Nevertheless, the presence of lead and concerns regarding its toxicity and stability have cast a shadow over their potential wide-ranging applications. In this study, we present the synthesis of two lead-free all-inorganic perovskite materials, Cs3M2Br9 (where M = Bi or Sb), in bulk form, using an aqueous halide acid medium. Additionally, we describe a top-down approach for the fabrication of two lead-free all-inorganic perovskite, Cs3M2Br9 (M = Bi or Sb) NCs. The Cs3Sb2Br9 NCs display a sheet-like morphology, while Cs3Bi2Br9 NCs exhibit a cubic structure. The PL spectra of Cs3Sb2Br9 and Cs3Bi2Br9 NCs exhibit distinct emission peaks at 476 nm and 472 nm, respectively, with relatively narrow full width at half maximum (FWHM) of 44 nm and 38 nm, respectively. Cs3Sb2Br9 and Cs3Bi2Br9 NCs demonstrate excellent thermal stability up to 320 °C and 470 °C, respectively. Notably, the high photoluminescence quantum yield (PLQY) of these NCs, Cs3Sb2Br9 NCs (31 %) and Cs3Bi2Br9 NCs (36 %) are highly beneficial for optoelectronic applications is observed.

From Dopant to Host: Solution Synthesis and Light‐Emitting Applications of Organic‐Inorganic Lanthanide‐Based Metal Halides

The rich and unique energy level structure arising from 4fn inner shell configuration of trivalent lanthanide ions (Ln3+) renders them highly attractive for light‐emitting applications. Currently, research primarily focuses on Ln3+ doping in either traditional garnets or the recently developed perovskite phosphors. However, there have been few reports on stable phosphors crystallized with pure lanthanide elements. Herein, a universal solution‐based route to eight Ln3+‐based metal halides from the organic‐inorganic A4LnX7 family is described, where A+ = 4,4‐difluoropiperidinium (DFPD+), Ln3+ = Nd3+, Eu3+, Ho3+, Sm3+, Tm3+, Tb3+, Yb3+, Er3+, and X− = Cl−, Br−. Visible photoluminescence (PL) is observed from Tb3+‐, Eu3+‐, Ho3+‐, and Sm3+‐based compounds with Tb and Eu compositions exhibiting high PL quantum yields of 90–100%; Nd3+‐, Tm3+‐, Yb3+‐, and Er3+‐based crystals show fascinating near‐infrared emission. Light‐emitting diodes (LEDs) fabricated with (DFPD)4TbCl7 yield characteristic emission of Tb3+, representing the first demonstration of electroluminescence from these organic‐inorganic Ln3+‐based metal halides. Moreover, these materials exhibit distinct excitation wavelength‐dependent emission after alloying with different Ln3+ ions, making them interesting for multicolor display and multilevel information encryption applications. It is foreseen that this study will open up the way to a possible design of robust optoelectronic devices based on lanthanide metal halides.

Synthesis of 5-(Aryl)amino-1,2,3-triazole-containing 2,1,3-Benzothiadiazoles via Azide-Nitrile Cycloaddition Followed by Buchwald-Hartwig Reaction.

An efficient access to the novel 5-(aryl)amino-1,2,3-triazole-containing 2,1,3-benzothiadiazole derivatives has been developed. The method is based on 1,3-dipolar azide-nitrile cycloaddition followed by Buchwald-Hartwig cross-coupling to afford the corresponding N-aryl and N,N-diaryl substituted 5-amino-1,2,3-triazolyl 2,1,3-benzothiadiazoles under NHC-Pd catalysis. The one-pot diarylative Pd-catalyzed heterocyclization opens the straightforward route to triazole-linked carbazole-benzothiadiazole D-A systems. The optical and electrochemical properties of the compound obtained were investigated to estimate their potential application as emissive layers in OLED devises. The quantum yield of photoluminescence (PLQY) of the synthesized D-A derivatives depends to a large extent on electron-donating strengths of donor (D) component, reaching in some cases the values closed to 100%. Based on the most photoactive derivative and wide bandgap host material mCP, a light-emitting layer of OLED was made. The device showed a maximum brightness of 8000 cd/m2 at an applied voltage of 18 V. The maximum current efficiency of the device reaches a value of 3.29 cd/A.

A Conjugated Carboranyl Main Chain Polymer with Aggregation-Induced Emission in the Near-Infrared.

Materials exhibiting aggregation-induced emission (AIE) are both highly emissive in the solid state and prompt a strongly red-shifted emission and should therefore pose as good candidates toward emerging near-infrared (NIR) applications of organic semiconductors (OSCs). Despite this, very few AIE materials have been reported with significant emissivity past 700 nm. In this work, we elucidate the potential of ortho-carborane as an AIE-active component in the design of NIR-emitting OSCs. By incorporating ortho-carborane in the backbone of a conjugated polymer, a remarkable solid-state photoluminescence quantum yield of 13.4% is achieved, with a photoluminescence maximum of 734 nm. In contrast, the corresponding para and meta isomers exhibited aggregation-caused quenching. The materials are demonstrated for electronic applications through the fabrication of nondoped polymer light-emitting diodes. Devices employing the ortho isomer achieved nearly pure NIR emission, with 86% of emission at wavelengths longer than 700 nm and an electroluminescence maximum at 761 nm, producing a significant light output of 1.37 W sr-1 m-2.

A Luminescent Hybrid Bimetallic Halide Family with Solvent‐Coordinated Rare Earth and Alkaline Earth Metals

Hybrid metal halides are an extraordinary class of optoelectronic materials with extensive applications. To further diversify and study the in‐depth structure‐property relations, we report here a new family of 21 zero‐dimensional hybrid bimetallic chlorides with the general formula A(L)n[BClm] (A = rare earth (RE), alkaline earth metals and Mn; L = solvent ligand; and B = Sb, Bi and Te). The Ln(DMSO)8[BCl6] (Ln = La, Ce, Sm, Eu, Tb, and Dy; DMSO = dimethyl sulfoxide) series shows broadband emission attributed to triplet radiative recombination from Sb and Bi, incorporating the characteristic emission of RE metals, where Eu(DMSO)8[BiCl6] shows a staggering PL quantum yield of 94%. The pseudo‐octahedral [SbCl5] with Cl vacancy in AII(DMSO)6[SbCl5] (AII = Mg, Ca and Mn) and the square pyramidal [SbCl5] in AII(TMSO)6[SbCl5] (TMSO = tetramethylene sulfoxide) enhance the stereoactive expression of the 5s2 lone pairs of Sb3+, giving rise to the observation of dual‐band emission of singlet and triplet emission, respectively. A series of Te(IV) analogues have been characterized, showing blue‐light‐excitable single‐band emission. This work expands the materials space for hybrid bimetallic halides with an emphasis on harnessing the RE elements and provides important insights into designing new emitters and regulating their properties.

A Luminescent Hybrid Bimetallic Halide Family with Solvent-Coordinated Rare Earth and Alkaline Earth Metals.

Hybrid metal halides are an extraordinary class of optoelectronic materials with extensive applications. To further diversify and study the in-depth structure-property relations, we report here a new family of 21 zero-dimensional hybrid bimetallic chlorides with the general formula A(L)n[BClm] (A = rare earth (RE), alkaline earth metals and Mn; L = solvent ligand; and B = Sb, Bi and Te). The Ln(DMSO)8[BCl6] (Ln = La, Ce, Sm, Eu, Tb, and Dy; DMSO = dimethyl sulfoxide) series shows broadband emission attributed to triplet radiative recombination from Sb and Bi, incorporating the characteristic emission of RE metals, where Eu(DMSO)8[BiCl6] shows a staggering PL quantum yield of 94%. The pseudo-octahedral [SbCl5] with Cl vacancy in AII(DMSO)6[SbCl5] (AII = Mg, Ca and Mn) and the square pyramidal [SbCl5] in AII(TMSO)6[SbCl5] (TMSO = tetramethylene sulfoxide) enhance the stereoactive expression of the 5s2 lone pairs of Sb3+, giving rise to the observation of dual-band emission of singlet and triplet emission, respectively. A series of Te(IV) analogues have been characterized, showing blue-light-excitable single-band emission. This work expands the materials space for hybrid bimetallic halides with an emphasis on harnessing the RE elements and provides important insights into designing new emitters and regulating their properties.

Synthesis and Optical Property Modulation of Substituted [2.2]Paracylophanes through Through‐Space Conjugation

4,16‐para‐substituted [2.2]paracylophane with naphthalene (PCP⎼NAP), anthracene (PCP⎼ANTH), and tetraphenylethylene (PCP⎼TPE), as new through‐space conjugated dimers, were prepared by the Suzuki–Miyaura cross‐coupling reaction of 4,16‐diboryl[2.2]paracyclophane and the corresponding bromo derivative using Pd(PPh3)4 as a catalyst and KOH as a base. The synthesized compounds were fully characterized by NMR and HR‐MS, and their photophysical and electrochemical properties were studied. The photoluminescence quantum yield of PCP⎼NAP, PCP⎼ANTH were determined to be 0.21, 0.50 and for PCP⎼TPE in aggregated state 0.31, respectively. PCP⎼TPE exhibited aggregation‐induced emission characteristics when the water fraction was greater than 50% in THF/water mixtures. PCP⎼ANTH and PCP⎼TPE were also characterized by X‐ray crystallography, and single crystals of PCP⎼ANTH were obtained from the centrosymmetric monoclinic space group C2/c. A single crystal of PCP⎼TPE crystallizes in the centrosymmetric triclinic space group P⎼1, with one molecule residing at the inversion center. The observed properties of these π‐stacked dimers were compared with respect to through‐space conjugation and conjugation length in the structure.

Ultrastable Copper Iodide Hybrid with Intrinsic Greenish White-Light Emission by Incorporating an Anionic Inorganic Functional Unit into an Extended Structure.

Incorporating a functional unit into the multidimensional coordination polymer skeleton is an efficient way to improve the stability of materials and expand their application. In this paper, anionic copper iodide inorganic functional modules are incorporated into one-dimensional extended chains by using a unique bidentate cationic organic ligand. Benefiting from the ionic extended structure, the resulting hybrid possesses a remarkable stability with a decomposition temperature as high as 300 °C. Meanwhile, the hybrid material exhibits intrinsic greenish white-light emission with a high photoluminescent quantum yield of 70%. The emission was investigated by temperature-dependent emission spectra, which proved to be the result of the synergistic effect of two energy states. The novel synthetic strategy provides an efficient route for the development of functional organic metal halides.

Mn Derived Growth of CsPbBr3 Nanoplatelets for Stable and Bright Orange Emission

Abstract Mn-doped perovskites have been extensively studied in optics, magnetism, and electronics due to their orange emission. However, successful Mn doping required a high Mn/Pb feed ratio. In this paper, Mn-doped CsPbBr3 nanoplatelets (NPLs) with bright orange emission were prepared by a two-step slow thermal injection synthesis. The slow injection of precursors effectively slow-down the crystal growth kinetic process and controls the growth of undoped CsPbBr3 NPLs. This process also significantly improves Mn doping efficiency. Mn doping induced the generation of numerous precursor clusters during the growth of CsPbBr3 NPLs, and the formation of these clusters was crucial for enhancing the doping efficiency. The maximum amount of Mn precursor in CsPb0.83Mn0.17Br3 was 50% of Pb precursors. The photoluminescence quantum yields (PLQYs) of CsPb0.94Mn0.06Br3 NPLs reached up to 80.6%, which was 3.1 times of that of CsPbBr3 NPLs. The PL properties of Mn-doped CsPbBr3 NPLs were significantly enhanced compared with pure CsPbBr3 NPLs. The growth process and luminescence mechanism of Mn-doped CsPbBr3 NPLs were discussed. High PLQYs and efficient Mn doping supplied an ideal approach for the preparation of various CsPbX3 (X = Cl, Br, and I) NCs for commercial applications.

Efficient Large-Area (81 cm2) Ternary Copper Halides Light-Emitting Diodes with External Quantum Efficiency Exceeding 13% via Host-Guest Strategy.

Ternary copper (Cu) halides are promising candidates for replacing toxic lead halides in the field of perovskite light-emitting diodes (LEDs) toward practical applications. However, the electroluminescent performance of Cu halide-based LEDs remains a great challenge due to the presence of serious nonradiative recombination and inefficient charge transport in Cu halide emitters. Here, we report the rational design of host-guest [dppb]2Cu2I2 (dppb denotes 1,2-bis[diphenylphosphino]benzene) emitters and its utility in fabricating efficient Cu halide-based green LEDs that show a high external quantum efficiency (EQE) of 13.39%. The host-guest [dppb]2Cu2I2 emitters with mCP (1,3-Bis(N-carbazolyl)benzene) host demonstrate a significant improvement of carrier radiative recombination efficiency, with the photoluminescence quantum yield increased by nearly 10 times, which is rooted in the efficient energy transfer and type-I energy level alignment between [dppb]2Cu2I2 and mCP. Moreover, the charge-transporting mCP host can rise the carrier mobility of [dppb]2Cu2I2 films, thereby enhancing the charge transport and recombination. More importantly, this strategy enables a large-area prototype LED with a record-breaking area up to 81 cm2, along with a decent EQE of 10.02% and uniform luminance. We believe these results represent an encouraging stepping stone to bring Cu halide-based LEDs from the laboratory towards to commercial lighting and displays panels. This article is protected by copyright. All rights reserved.